Relays

NexLight 20 Amp and 6 Amp relays are rated to accommodate all types of lighting loads, including High Intensity Discharge (HID) and electronic ballasts. They also include a built-in lever for manual On/Off control, and provide true status feedback to other NexLight components. 6 Amp relays have a relay controller integral to the unit.
 
 
Item Model No. Description Specs
K 4121PR(120)& K4123PR(277)  Used to connect auxiliary devices, like third party photocells and other devices to the Nexlight system. 
WR3416-84  The WR3416-84 single pole relay contains 4 independent 6 Amp relays each rated at 277VAC/300VAC for use in controlling lighting and other loads. It contains a manual switch to allow manual load control. The addresses are set by the use of the integral dip switches . It provides positive feedback to the NexLight control system. 
WR6161K-84  The WR6161K-84 is a single pole 20 Amp 277VAC/300VAC/347VAC remote control relay for use in controlling lighting and other loads. It contains a manual switch to allow for manual load control. It also provides status feedback when used in conjunction with NexLight relay control device WRT4014-8. WR6161K-381 same as above with an auxiliary contact for status feedback.  
WR6166K-84  The WR6166K-84 is a double pole 20 Amp 277VAC/300VAC/347VAC remote control relay for use in controlling lighting and other loads. It contains a manual switch to allow manual load control. It also provides status feedback when used in conjunction with NexLight relay control device WRT4014-8.  
WR6172K-84  The WR6172K-84 is a double pole 20 Amp 277VAC/300VAC/347VAC/480VAC remote control relay for use in controlling lighting and other loads. It contains a manual switch to allow manual load control. It also provides status feedback when used in conjunction with NexLight relay control device WRT4014-8.  
WRT4014-8  The WRT4014-8 provides the bus level interface for four independent WR6161K-84, WR6166K-84, and WR6172K-84 HID remote control relays. The addresses are set by the use of the WRT9500-8 or WRT9600-8 addressing tools. 
WRT4124-84  The WRT4124-84 single pole relay contains 4 independent 6 Amp relays each rated at 120VAC/277VAC for use in controlling lighting and other loads. It contains a manual switch to allow manual load control. The addresses are set by the use of the WRT9500-8 or WRT9600-8 addressing tools. It provides positive feedback to the NexLight control system. 
Need Acrobat Reader to view our files? Click Here.