The BBR910 Relay Interface is an input device used to interface WR6161 20 amp relays to any device that provides a dry contact closure on a stand alone basis. example: Building Management Systems, Time Clocks, Occupancy Sensors and nonintelligent switches) without the use of the 2-wire bus.

Used to connect auxiliary devices, like third party photocells and other devices to the Nexlight system.

The WR3416 single pole relay contains 4 independent 6 Amp relays each rated at 277VAC/300VAC for use in controlling lighting and other loads. It contains a manual switch to allow manual load control. The addresses are set by the use of the integral dip switches . It provides positive feedback to the NexLight control system.

The WR6161 is a single pole 20 Amp 277VAC/300VAC/347VAC remote control relay for use in controlling lighting and other loads. It contains a manual switch to allow for manual load control. It also provides status feedback when used in conjunction with NexLight relay control device WRT4014.

The WR6166 is a double pole 20 Amp 277VAC/300VAC/347VAC remote control relay for use in controlling lighting and other loads. It contains a manual switch to allow manual load control. It also provides status feedback when used in conjunction with NexLight relay control device WRT4014.

The WR6172 is a double pole 20 Amp 277VAC/300VAC/347VAC/480VAC remote control relay for use in controlling lighting and other loads. It contains a manual switch to allow manual load control. It also provides status feedback when used in conjunction with NexLight relay control device WRT4014.

The WRT4014 provides the bus level interface for four independent WR6161, WR6166, and WR6172 HID remote control relays. The addresses are set by the use of the WRT9500 or WRT9600 addressing tools.

The WRT4124 single pole relay contains 4 independent 6 Amp relays each rated at 120VAC/277VAC for use in controlling lighting and other loads. It contains a manual switch to allow manual load control. The addresses are set by the use of the WRT9500 or WRT9600 addressing tools. It provides positive feedback to the NexLight control system.